Page 160 - Buyers Guide Interactive Catalog 2018-19

158
JAN/SAN
• Designed for heavy-duty cleaning applications where a limited amount of ventilation is required.
• 3/4" GHT. • Overall gun length is 48".
• Liquid filled gauge to reduce vibration.
• Maximum water temperature is 140°.
• Liquids can be easily dispensed using the low pressure nozzle and liquid volume control.
• Pressure washers can be easily maneuvered into tight spaces for storage and use around the processing floor.
2-HP Pressure Washer
G.F.I. Reset.
Handle is removable.
50' Pressure Hose with Quick Disconnects on both ends.
Liquid Volume Control.
High Pressure Hose Outlet.
GHT Water Hose Inlet.
Liquid Pick Up.
High/Low, 0-60° Adjustable Spray Pattern Nozzle.
Pressure Washers with Stainless Steel Cart
Pressure Adjustment.
Pressure Gauge.
• Single-phase 110 volt, 18 amp washer provides 3 gpm at 1,000 PSI.
➤ Shipping: 2 boxes shipped UPS. 5-HP Pressure Washer
• Single-phase 220 volt, 23 amp washer provides 4 gpm at 2,000 PSI.
36' Power Cord
10" Pneumatic Tires.
We recommend use with our Challenge General Purpose Cleaner.
See page 147 for details.
➤ 4 bottles per case. PRODUCT CASE
➤ Shipping Weight: 250-lbs.
ITEM NO. PRODUCT
29903772 2-HP,110Volt,1,000PSI............................ 29905005 5-HP,220Volt,2,000PSI............................ 299013551 Replaceable36"Wand/Gun..........................
F.O.B. FACTORY
On/Off Switch.
Spray handle has pressure locking feature.
Non-Marking
High-Pressure Hose
• Reinforced with wire-braid.
• One swivel and one straight fitting.
• Bend restrictors at each end.
• Rated at 3,000 psi to 170˚ F.
• Recommended for temperatures up to 170° F.
Twist nozzle side to side to control spray pattern.
Push or pull nozzle to adjust from low to high pressure.
IMPORTANT:
Liquid chemicals will siphon on low pressure side only.
Built in bottle holder for soaps and sanitizers.
ITEM NO.
6129 6703 Challenge . . . $59.95
Cam Spray Indoor*/Outdoor Pressure Washers
High-pressure dependability and easy maintenance available in either a cold water or hot water unit.
• Fully enclosed 2.0 hp motor rated at 1,450 psi; 2.06 gpm. • 25' pressure hose.
• 2-piece gun/wand with variable pattern tip, 0-60° spray pattern.
• Triplex plunger pump with ceramic plungers and stainless steel valves.
• Variable pressure adjustment, low-pressure chemical application.
Available with 1/2" or 3/8" NPT male connectors on both ends.
...... ...... ...... ......
• Cold water pressure washer has a maximum temperature of 140˚ F; hot water pressure washer has a maximum temperature of 180˚ F.
• 35' power cord with
ground fault circuit interrupter.
F.O.B. FACTORY
ITEM NO.
34374647 1,450psi,ColdWater ........... 34371501 1,450psi,HotWater ............ 34372078 ReplacementHose..............
*Fume-free electric power for use indoors
➤ 3/8" NPT connectors on 3/8" I.D. hose. INSIDE
EACH
ITEM NO. LENGTH DIMENSION 353820821 75'Hose.... 1/2"I.D. 353880761 25'Hose.... 3/8"I.D. 353898371 50'Hose.... 3/8"I.D. 35380015 75'Hose.... 3/8"I.D.
PRODUCT EACH
EACH
$1,995.00 2,999.00 119.00
$299.95 89.95 129.95 252.95
$999.00 1,199.00 59.95
➤Shippingweight:68-lbs. BUNZL | KOCH Supplies • 800-456-5624 • www.bunzlpd.com • FAX 800-329-5624 • email: [email protected]
PRICES ARE SUBJECT TO CHANGE — VISIT OUR WEBSITE FOR CURRENT PRICING. PRESSURE WASHERS